Introduction to the installation and use of laser metal pipe cutter chuck ：
1. Install the anti-rotation screws of the air distributor at the end of the main chuck according to the requirements. The inconcentricity of the stator and rotor of the air distributor may be caused by tightening the fastening screws at both ends, which will be damaged after long-term use.
2. The middle chuck ensures that the laser metal pipe cutter chuck can not rotate during the process of clamping or loosening the air intake; otherwise, it will wear the inner rubber of the air circuit components and cause air leakage. After the parts are clamped, the middle card passes through the check valve in the air circuit to realize the pressure maintenance of the air circuit. The pressure maintenance time can be as long as more than 12 hours, so that the product will not be affected by sudden gas cut-off during processing.
3. In order to prevent the laser metal pipe cutter chuck from misoperation during the air intake process of opening or clamping the middle jaw
It is recommended to upgrade the software to version 7.0.15.142 or later: During the clamping and releasing process of the laser metal pipe cutter chuck, all motion commands with B-axis rotation are not allowed to be executed.
4. Precautions: The way of adjusting the high gasket of the center is wrong. After the screw is locked, the bearing base will be uneven and the bearing seat will be deformed. In severe cases, the bearing may be damaged.
Correctly install the main laser metal pipe cutter chuck so that it is parallel to the guide rail of the bed, and ensure that the axis of the pipe is parallel to the guide rail during the moving and feeding process of the main chuck; use the debugging reference plane of the middle card to debug the middle chuck,Ensure the concentricity and coaxiality of the main chuck and the middle chuck and improve the cutting accuracy.
How to make a laser metal pipe cutter chuck bring great profit and wealth in the long term after it is installed requires the buyer to treat this partner well! For high quality laser pipe cutting chucks, routine maintenance must be performed just like normal laser chucks. In addition to daily maintenance, good maintenance of the chuck can keep the accuracy of the chuck. Good maintenance of equipment, long service life, the benefits naturally increase.
The above content notes the operating procedures, I hope you will help. In the use of laser tube cutting chuck we must pay attention to the operation process of the laser metal pipe cutter chuck and precautions to avoid causing accidents. Only the correct operation to maintain safe production, in the protection of their own while also ensuring productivity.
As a professional laser metal pipe cutter chuck manufacturer, Dairuike can be guided by professional technical personnel on line in matters of transportation and installation of laser pipe cutting chucks, so that customers can save heart, time and effort and give customers a satisfactory laser chuck.
Upon receipt of the product, the buyer should immediately check the quality and integrity of the product. The following are some common inspection steps:
Package integrity: Check whether the product packaging is intact and whether there are obvious signs of breakage or wet leakage. If there is a problem with the packaging, Dairuike should be contacted promptly for resolution.
Specifications and information: Check that the product specifications and information are consistent with those provided at the time of purchase, including model number, size, and features. Make sure the product meets expectations and needs.
Appearance check: Check the product appearance carefully to make sure there are no obvious scratches, deformations or other damages. Pay special attention to key parts of the product, such as connection ports, control panels, etc.
Function test: If available, conduct a simple function test to verify whether the basic operation and performance of the product are normal. If any problems are found, contact Dairuike immediately for support and solutions.
If any problems or concerns are found during the inspection process, the buyer should contact Dairuike immediately. Dairuike will provide prompt customer support and assist in resolving any quality or shipping issues. Timely communication and feedback will ensure that issues are resolved quickly and the buyer’s rights and satisfaction are guaranteed.
